The Outdoor Distribution Panel is a fully assembled, sealed electrical enclosure designed to safely distribute and protect low-voltage power circuits in exposed outdoor locations.
Cases
Technical Specifications
| Parameter | Specification |
|---|---|
| System Voltage | 230V / 400V AC (up to 690V optional) |
| Rated Current (Main) | 63A – 630A |
| Branch Circuits | 6A – 250A per circuit (customizable) |
| Enclosure Material | 1.5–2.0 mm hot-dip galvanized steel or polycarbonate (PC); powder-coated (RAL 7035) |
| Protection Rating | IP65 / IP66 |
| Operating Temperature | -40°C to +70°C |
| Impact Resistance | IK10 |
| Internal Structure | 35mm DIN rail + copper busbar (≥99.9% purity) |
| Door Type | Opaque or transparent; lockable with tamper-proof hinges |
| Compliance | IEC 61439-1/-2, IEC 60529, CE, RoHS, CCC |
Features
All-Weather Protection
IP65/IP66 sealing keeps out rain, dust, and moisture-even during heavy storms or washdown.
Corrosion Resistant
Galvanized steel or UV-stable polycarbonate withstands years of sun, salt, and humidity without rust or fading.
Applications
Building exterior lighting and power distribution
Street lighting and traffic signal cabinets
Solar PV AC combiner and sub-distribution
Water/wastewater pump stations
Agricultural irrigation control panels
Temporary power for construction sites
Customization
Custom current ratings, number of circuits, and breaker brands (e.g., CHNT, Schneider, ABB)
Integration of surge protectors, energy meters, or smart monitoring (Modbus, IoT)
Stainless steel (304/316) for coastal or chemical environments
Special dimensions, knockouts, or cable entry positions per your drawings
Full documentation: wiring diagrams, test reports, CE/CCC certificates
FAQs
Is the panel ready to connect on site?
Yes-all standard units are fully wired, labeled, and tested. Just mount and connect incoming/outgoing cables.
Can it be used near the ocean?
Yes. We recommend hot-dip galvanized steel or stainless steel enclosures for high-salt environments.
Do you offer motor starter versions?
Yes-we can integrate contactors, overload relays, and start/stop controls for pump or fan applications.
